Email Us For Details
sales@daobenmachinery.com
24/7 Customer Support
+8613967807860
sales@daobenmachinery.com
+8613967807860
The M7 Series is our next-generation smart injection molding machine. It pairs a 10.4-inch intelligent control system with a high-precision servo hydraulic platform. The range covers six clamping force tiers, from 1300 kN up to 3800 kN. Also, each tier comes with up to four injection unit sizes.
Every M7 is built for faster cycles, tighter tolerances, and lower power use. Therefore, it outperforms standard hydraulic machines of the same tonnage.
Moreover, every M7 ships MES-ready as standard. So it slots into a digital factory from day one.
Smart Control System
Servo Energy Saving
High-Rigidity Frame
Digital Factory Ready
The fixed platen uses a centre-press structure with multiple ribbed reinforcements. They extend from the centre outward across the platen face.
As a result, the platen presses the mold reliably across the full surface. So centre deformation stays low even under full clamping load.
The moving platen uses a box-type centre-press design. This significantly boosts second platen rigidity.
Also, deformation drops by 10-15% compared to conventional platens. Therefore, product flash rates fall and tooling life increases.
The M7 ships with a 10.4-inch TFT true-colour touchscreen as standard. The interface stores up to 1000 sets of mold parameters.
Operators can also input and search mold information directly from the panel. So setup time on repeat jobs drops sharply.
The control system captures motion and temperature data at millisecond level. Therefore, every cycle can be reviewed in fine detail.
Dual-cursor analysis, curve zooming, and multi-mode data overlay are all built in. So your process team can pinpoint quality issues fast.
The M7 hydraulic system is built around an electric IMM control platform. It uses 23-bit absolute encoder technology. Also, the system pairs with a high-response, low-inertia servo motor. As a result, precision improves by 15-20% over standard servo systems.
A high-precision closed-loop proportional valve controls every mold-open and mold-close action. So repeat positioning accuracy reaches ±0.1 mm.
Because mold movement is more consistent, automated parts pickup also becomes more reliable. This matters for cells running unattended or with multiple robot arms. Moreover, it reduces scrap from missed picks.
Every M7 machine comes with an MES interface built in. It’s not an add-on, and it’s not a premium upgrade. Factories can connect the machine to their current production system right away. That means integration work wraps up much sooner.
The M7 supports OPC-UA, MQTT, and MODBUS protocols out of the box. Therefore, most factory networks can connect without custom drivers.
Real-time data sharing makes the M7 a strong fit for digital factories. Quality teams can monitor cycle data live.
The M7 Series covers six clamping force tiers, from 1300 kN to 3800 kN. Each tier comes with up to four injection unit sizes.
So you can match shot size to your actual part weight. Therefore, you do not pay for capacity you will not use.
Smart functions are built into every model, not reserved for the larger machines. Whether you order the M7-130 or the M7-380, you get the same control system.
Moreover, you get the same 10.4-inch touchscreen and the same ten smart features across every model.
The servo motor only draws power during active movement. At idle and during hold phases, energy draw drops close to zero.
Every M7 ships with the MES interface as standard. So you do not pay extra for digital factory readiness.
Our molding machine is a professional solution in the injection molding process for your business. Cost optimization expert.
Process/Mold Analyse and Design
